REV C currently compatible with "JDM-001", "JDM-010", "JDM-011", "JDM-012" and "JDM-020". Need others? See REV D modchip instead.
*Note: This modchip is currently compatible with "JDM-001", "JDM-010", "JDM-012" and "JDM-020" style circuit boards. See REV D modchip JDM-030 circuit boards.
The SCORCH RAPID FIRE ELITE latest software platform for their modded controller. This chip gives you access to 100% of the same features as our pre-modded SCORCH RAPID FIRE ELITE controllers.
You'll need to provide this equipment on your own to complete the install:
30-gauge or similar wire
A Phillips screwdriver for opening your PS4 controller
9/64" drill bit (for installing the mod switch)
3/8" or 9mm drill bit, for installing the mod LED indicator
Hot glue (for attaching the mod switch and LED indicator)
Your purchase of this DIY "kit" includes:
The PS4 SCORCH RAPID FIRE ELITE Modchip
Mod indicator LED driver board
Mod indicator custom LED lense
On-line full color, detailed installation instructions
Please note, very little support is provided for Do-it-yourself kits, and this install is not advised for novices. The kits are intended for those customers who are already experienced with controller modifications.
Modchips are non-returnable and non-refundable. You will not receive a refund for not researching the proper board type for your controller. PERIOD.
NOTE: On first power-up, be sure to hold down the TRIANGLE button to unlock all mods. If you accidentally lock some mods on the first power-up, they will be locked forever (no password reset is available on DIY kits).